Commercial Plywood

Next > >

Commercial Plywood

<<Previous

Send Inquiry

Product Code : 06

Product Description

Empowered by a technologically-advanced infrastructural facility, we are engaged in offering a wide assortment of Commercial Plywood which is melamine impregnated and machine pressed onto both surfaces of the particle boards is used to manufacture these boards as per the industry standards and norms. This ensures permanent bonding between the board and lamination, which help in providing long service life.

Technical Specification

Test	RequiredValue	Observed Value
Moisture Content	5-15%	As per ISI Req.
Dimension	Lenght+5mm, Width+2mm Thiknes2-8mm + 5%, < 6mm + 10%	With limit
Sp. Gravity		As Per ISI Req.
Resistance to water (3 cycle of 8 hr boiling & 16 HR. Drying at 650C) -Adhesion to plies	Min pass Standard	Excellent
Resistance to Micro-oganism - Adhesion to plies	Min pass Standard	Excellent
Static Bending Test (a) MODULUS oF ELASTICITY -along the grain AVG -across the grain AVG (a) MODULUS oF RuptureS -along the grain AVG -across the grain AVG	Min. 5000N/sq.mm Min. 2500N/sq.mm MIn. 40N/sq.mm MIn. 20N/sq.mm	As per ISI REq. As per ISI REq. As per ISI REq. As per ISI REq.